- Home
- ยป
- Products & Services
- »
- Fluke Amprobe ,Testers 4
Fluke Amprobe ,Testers 4
AM-420 Residential Digital Multimeter
Product Brochure
Model Name/Number | AM-420 |
Brand | Amprobe |
AC Voltage | 200.0 / 300 V |
Resistance Range | 200.0 ohms,2.000 / 20.00 / 200.0 k ohms |
DC Voltage | 200 mV,2.000 / 20.00 / 200.0 / 250 V |
DC Current | 200.0 microA,2.000 / 20.00 / 200.0 mA |
Battery test | 1.5 V,9 V |
Maximum display | 1999,updates 2 to 3/sec |
Operating altitude | Less than 6561 ft |
- est leads installed
- Measures AC/DC voltage
- Measures DC current
- Measures resistance
- Audible continuity alert
- Rated to CAT II 250 V
- Diode testing
C Voltage | 200.0 / 300 V | +/-(1.5% rdg + 4 LSD) @ 45 Hz to 400 Hz, 2 V to 200 V |
DC Voltage | 200 mV 2.000 / 20.00 / 200.0 / 250 V | +/-(1.2% rdg + 2 LSD) @ 200 mV to 200 V |
DC Current | 200.0 µA 2.000 / 20.00 / 200.0 mA | +/-(1.2% rdg + 5 LSD) @ 200 µA to 20 mA |
Resistance | 200.0 2.000 / 20.00 / 200.0 k | +/-(1.5% rdg + 5 LSD) @ 200 to 200 k |
Continuity | • | |
Diode Test | • | |
Battery test | 1.5 V, 9 V | +/-(5.0% rdg + 1 LSD) |
Fluke 1AC II Non-Contact Voltage Tester
Product Brochure
Model Name/Number | Fluke 1AC II |
Brand | Fluke |
Voltage Sensing Ranges | Nominally, 90 V AC to 1000 V AC |
Detector Tip Style | Flat-tip |
IP Rating | IP 40 |
Operating Temperature | -10 DegC to 50 DegC |
Operating Altitude | 3000 m |
Batteries | 2 AAA alkaline batteries included |
Battery Life | Typical battery life of greater than 1 year |
- Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected
- Continuous self-test so you always know it’s working
- Audible/Silent mode for added convenience
The pocket-sized voltage detector
The portable 1AC II non-contact voltage tester from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miswires of an electrical outlet.
The tip glows red and a beeper sounds when voltage is detectedA loud, easy to hear beeper will sound and the tip will glow red when voltage is detectedOptionally, the beeper can be disabled for use in quiet environments
- Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected
- Continuous self-test so you always know it’s working
- Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC
- Audible/Silent mode for added convenience
Price Range: MRP+10% Tax
Fluke 2AC Non-Contact Voltage Tester
Product Brochure
Model Name/Number | Fluke 2AC |
Brand | Fluke |
EMC Compliance | Meets IEC 61326-12006 |
Temperature | -10 DegC to 50 DegC |
Altitude | 2000 m (CAT IV 1000 V) |
Voltage Detection | 90 to 1000 V AC |
Batteries | 2x AAA |
2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.
Features:
- Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready
- Innovative 'Battery Check' button function ensures battery is in good condition
- Non-contact voltage detection from 90 to 1000 V AC
- Innovative 'Battery Check' ensures battery is in good condition*
- Integrated clip design, optimized for pocket storage
Fluke LVD2 Non-Contact Voltage Tester
Product Brochure
Model Name/Number | Fluke LVD2 |
Brand | Fluke |
Voltage | 90 to 600 V AC |
Operating Temperature | 0 DegC to 50 DegC |
Safety | CAT IV 600 V |
Battery Type | AAA battery |
Bulb life | 100,000-hour |
Features:
- Non-contact AC voltage tester and LED flashlight
- Features dual-sensitivity for two levels of detection
- Indicates proximity to AC voltage source with blue light
- Indicates you’re at the source with red light
- Non-contact AC voltage tester and LED flashlight
- Detects from 90 to 600 V AC
- Features dual-sensitivity for two levels of detection
- Indicates proximity to AC voltage source with blue light
- Indicates you’re at the source with red light
- Ultra-bright white LED light with 100,000-hour bulb life
- Safety rated to CAT IV 600 V
- Operating temperature 0°C to 50°C
- AAA battery included
Fluke 1507 Insulation Resistance Tester
Product Brochure
Model Name/Number | 1507 |
Brand | Fluke |
Weight | 550 g |
Accuracy | 600.0 V |
Input Impedance | 3 Mohms (nominal), Less than 100 pF |
Insulation Test Voltages | 50 V, 100 V, 250 V, 500 V, and 1000 V |
Overload Protection | 600 V rms or DC |
Measurement Range | 0.01 Mohms to 10 Gohms |
Short Circuit Current | 1 mA nominal |
Maximum Capacitive Load | Operable with up to 1 microF load |
Storage Temperature | -40 DegC to 60 DegC |
Size | 5.0 x 10.0 x 20.3 cm |
IP Rating | IP40 |
- Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
- Automatically calculates Polarization Index and Dielectric Absorption Ratio
- Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
The Fluke 1507 is a versatile, compact, handheld insulation tester for advanced industrial and electrical insulation testing. Its multiple test voltages make it the ideal tool for many troubleshooting, commissioning, and preventative maintenance applications.
Take advantage of the 1507 full feature set to easily and quickly perform advanced insulation resistance testing. Its handy size and light weight make it easy to pack and use. Additional features, like the remote probe, save both time and money especially when performing repetitive tests. And its reasonable price and rugged reliability make it an excellent value.
Price Range: MRP+10% Tax
Fluke 1621 GEO Earth Ground Tester
Product Brochure
Model Name/Number | Fluke 1621 |
Brand | Fluke |
Safety | IEC/EN 61010-1, 600 V CAT II, pollution degree 2 |
Weight | 850g |
Measuring Time | 8 seconds |
Battery Type | One 9 volt alkaline (LR61) |
Battery Condition | LO-BAT is displayed if voltage drops below 6.5 V |
Climatic Class | VDE/VDI 3540 RZ (conforming to KWG as per DIN 40040, 4/87) |
Working Temperature | -10 Deg C to +50 Deg C |
Temperature Coefficient | +-0.1% of range per degree Kelvin |
Dimensions | 113 x 54 x 216 mm |
Test Vvoltage | 3.7 kV |
Protection Type | IP 40; IEC/EN 60529 |
Features:
- Easily capture values with single-button operation
- 3-pole Fall-of-Potential earth testing for basic measurements
- 2-pole resistance measurements for added versatility
- Ensure accurate measurements with automatic ‘noise’ voltage detection
- Hazardous voltage warning offers increased user protection
- Clearly read and record data with a large, backlit display
- Rugged holster and design for tough work environments
- Portable size allows for easy transportation
Price Range: MRP+10% Tax
LM-100 Light Meter
Product Brochure
Model Name/Number | LM-100 |
Measuring Range | 200000 Lux or 20000 Foot candles |
Brand | Amprobe |
Display | Large, 3-1/2 digit display |
Sensor | Silicon photodiode and filter |
Measurement Rate | 2.5 times per second |
Polarity | Automatic, positive implied, negative polarity indication |
Altitude | 2000m, indoor operation |
Power Supply | 9V NEDA 1604, IEC 6F22, JIS 006P battery |
Battery life | 200 hours |
Dimension | 130 x 63 x 38 mm ((Base) |
Weight | 220 g |
The Amprobe LM-100 light meter measures the visible light from fluorescent, metal halide, high-pressure sodium or incandescent sources. It is a portable, easy-to-use digital light meter designed for simple one-hand operation reading in Lumen (lux) or footcandle (fc) units. The LM-100 measures a wide range of light up to 20,000 fc or lux with an accurate, high resolution of 0.01 fc/lux. Use the LM-100 light meter to measure the illumination level in the interior and to switch off or reduce or increase the output level of lighting fixtures. Reduce the energy burden of the building by significantly increasing the efficiency of its lighting system. One lux is the illumination from a one candela lamp perpendicular to a surface one meter squared at a distance of one meter. One fc is the illumination from a one candela lamp perpendicular to a surface one foot squared at a distance of one foot. 1 footcandle = 10.764 lux and 1 lux = 0.09290 footcandles โ Measure in Lux or Footcandles, front panel switchable โ Measuring Range to 20,0000 Lux or Foot candles โ Silicon photodiode sensor and filter โ Data Hold to freeze reading on the digital display โ MIN / MAX ability to show high and low readings โ Auto Power Off to save battery life โ Includes protective sensor cap โ Large, 3-1/2 digit display
Amprobe LAN-1 LAN Cable Tester
Product Brochure
Display | 18 LEDs 9 red and 9 green, 9 LEDs on remote module |
Brand | Amprobe |
Model Name/Number | LAN-1 |
Battery Type | Standard 9-volt battery, NEDA 1604A, JIS 006P, IEC 6F22 |
Connector Types | RJ45, BNC |
Continuity Maximum Length | More than 300 meters |
Cable Types Tested | 10/100 base-T; 10 base-2; RJ45; AT T 258A; EIA / TIA 568A/568B; Token Ring |
Operating Temperature | 0 to 40 Deg C |
Features:
- Test pin configuration for:
- 10/100 base -T cable
- 10 base-2 cable
- AT T 258A cable
- EIA/TIA 568A/568B cables
- Token ring cable
- Verify the cable wiring for continuity, opens, shorts or incorrect wiring
- Test installed cable on wall plate or the patch panels by using the remote termination module
- Perform loopback test or remote test
- Buzzer sound warning for error condition in cable
- Two sets of LED lights for source and test indication
Price Range: MRP+10% Tax
Amprobe LM-200 LED Light Meter
Product Brochure
Model Name/Number | LM-200 |
Brand | Amprobe |
Display | 2000 count LCD |
Sensor | Silicon photodiode and filter |
LED Light Measurement | 31/2 digits, 2000 readings |
Power Supply | 9V NEDA 1604, IEC 6F22, JIS 006P battery |
- Lux or footcandle user selectable measurement units
- Measuring range of 200,000 lux or 20,000 foot candles
- Data hold to freeze reading on the digital display
- MAX recording to capture highest light measurement
- Measuring lights source include all visible ranges
- Spectral response close to CIE luminous spectral efficiency
- Angled light cosine correction
- Extended length of wire for light sensor approximately 5 feet (1.5m)
- Measurements according to JISC1609:1993 and CNS 5119 general A class specifications
- Includes protective sensor cap
- Large, 3-1/2 digit display
Price Range: MRP+10% Tax
Fluke 1503 Insulation Resistance Meter
Product Brochure
Model Name/Number | 1503 |
Brand | Fluke |
Weight | 550 g |
Accuracy | 600.0 V |
Operating Temperature | -20 Deg C to 55 Deg C |
Input Impedance | 3 Mohms (nominal), Less than 100 pF |
Overload Protection | 600 V rms or DC |
Test Voltage | 500 V, 1000 V |
Short Circuit Current | 1 mA nominal |
Auto Discharge | Discharge time less than 0.5 second for C - 1 microF or less |
Size | 5.0 x 10.0 x 20.3 cm (H x W x L) |
IP Rating | IP40 |
- A rugged, compact insulation resistance tester for residential and commercial electricians
- Performs insulation tests from 0.01 M¿¿¿ to 2000 M¿¿¿
- Offers two insulation test voltages: 500 V and 1000 V
- Includes live circuit detection to prevent insulation test if voltage >30 V is detected
- Measures resistance from 0.01 Ω to 20.00 kΩ
Fluke I2500-18 Flexible Current Probes
Product Brochure
Brand | Fluke |
Model Name/Number | Fluke i2500-18 |
Frequency | 500 Hz |
AC Current | 2500 A |
Safety Rating | CAT III 1000 V, CAT IV 600 V |
Coil Diameter | 7.5 mm |
Cable Length | 1.8 m |
Measurement Range | 2500 A AC |
The Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500 A AC while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. Available in 25 cm (10 in) and 45 cm (18 in) sizes.
Key features:
- Expands the measurement range to 2500 A AC while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
- CAT IV 600 V, CAT III 1000 V
- 7.5 mm coil diameter allows measurement in tight spaces
- Ergonomic design allows easy operation with one hand
Fluke Intellitone Pro 200 Lan Kit
Minimum Order Quantity: 1 Piece
Product Brochure
Model Name/Number | Fluke InetelliTone Pro 200 LAN Kit |
Usage/Application | LAN Cable Testing Kit |
Display | Digital |
Weight | 300 gm |
Description | Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic |
Storage Temperature | -4 DegreeF to +140 DegreeF (-20 DegreeC to DegreeC) |
Brand | Fluke |
Fluke D914 Impact Tool
Minimum Order Quantity: 1 piece
Product Brochure
Drive Size | Hook, spudger and blade storage tools are built into the handle |
Brand | Fluke |
Model | Fluke D914 |
Max Torque | variety of torque tool bits and sockets |
Air Consumption | Not applicable |
No Load Speed | Soft touch -rubber handle and special ergonomic design |
Blade Storage | It accept Phillips-head or flat screwdriver blade |
Material | rubber handle and special ergonomic design |
Diameter | Not required |
Color | Fluke std color- Yellow |
- Industry standard, internationally accepted
- Hook and spudger tools are built into the handle
- Automatic spring handle --choose low impact for 24/26 gauge wire or high impact for 22-gauge wire
- D914 and D914S impact punch down tools accept Phillips-head or flat screwdriver blade
- Convenient blade storage built into the handle
- Adapter blade allows technician to use a variety of torque tool bits and sockets
- Easy blade insertion, locks in place
- D914STM soft touch impact punch down tool features a rubber handle and special ergonomic design for better grip and to reduce hand fatigue
Amprobe TACH-10 Contact and Non-Contact Tachometer
Product Brochure
Model Name/Number | TACH-10 |
Brand | Amprobe |
Time Base Type | 4.0Mhz Quartz Crystal |
Rotation | 10.0 rpm - 99999 rpm (non-contact),10.0 rpm - 19999 rpm (contact) |
LCD Size | 15(H)x33(W)mm |
Battery | 9V battery |
Power Consumption | 5uA(Idle),18mA(measurement) |
- Measures rotational and surface speed
- User selectable units for contact measurement: RPM, m/min, ft/min, yd/min
- Non-contact measurement in RPM
- Digital display
- Auto power off function
- Easy to select units and mode functions
Price Range: MRP+10% Tax
Amprobe BAT-200 Battery Tester
Product Brochure
Usage/Application | Industrial |
Model Name/Number | BAT-200 |
Brand | Amprobe |
Warranty | 1 Year |
Power Supply | Battery Powered |
Weight | 0.1 Pounds |
Battery Compatibility | 9V n AA n AAA n C n D n 1.5V Button Type |
Battery Types | 9V, AA, AAA, C, D, 1.5V Button type |
Display Type | Analog |
- Easy-to-read color-coded display with “good,“low and “replace/recharge indicators
- Works with standard and rechargeable batteries
- Compact design
- Ergonomic battery holder
- Users manual included
Price Range: MRP+10% Tax
Amprobe SOLAR-100 Solar Power Meter
Product Brochure
Brand | Amprobe |
Range | 1999 W/m2, 634BTU / (ft2xh) |
Model Name/Number | SOLAR-100 |
Display | 31/2 digits, 2000 readings |
Battery | 1 X 9V Alkaline battery (NE DA 1604A, IE C 6LR61) included |
Solar Power | Up to 2000 W/m2, 634 BTU/(ft2xh) |
- Measures the solar power and transmission up to 2000 W/m2, 634BTU / (ft2xh)
- Power mode – measurement of the power per unit area of incident solar radiation
- Transmission mode – calculates the solar power transmission percentage of the material for example how much solar power in % will be transmitted through the window
- Convenient to read display with remote sensor technology
- Selectable measurement units either W/m2 or BTU / ( ft2 x h)
- Data hold
- Max/min functions to indentify locations with maximum or minimum power
-
ptimize the placement of solar systems and verify window efficiency. The SOLAR-100 measures solar output that is used to calculate overall energy, efficiency and placement of solar systems.
Applications:
- Windows performance – calculation and verification of the heating or heat reduction caused by direct sunlight
- Solar radiation measurements
- Solar power research for location of the solar panels or solar water heater
- Physics and optical laboratories
- Meteorology
- Agriculture
Amprobe TMD-50 Thermocouple Thermometer
Product Brochure
Model Name/Number | TMD-50 |
Product Type | K Type |
Temperature Range | -200 - 1372 DegC |
Brand | Amprobe |
Accuracy | 0.1 % |
Dual Input | T1, T2, T1-T2 |
- Highly accurate thermometer with 0.1% basic accuracy for precise measurements
- Dual input T1, T2, T1-T2
- Large, backlit easy to read display
- In-field thermocouple offset adjustment
- °C/°F selection
- Robust protective Holster
- Auto-Power Off
- MIN/MAX/HOLD functions
- Average/Relative Zero Functions
Price Range: MRP+10% Tax
Fluke TL75 Hard Point Test Lead Set
Product Brochure
Brand | Fluke |
Model Name/Number | Fluke TL75 |
Material | PVC |
Size | 48 inches |
Colour | Black, Red |
Features:
- Designed and built in the U.S.
- CSA listed
- CAT IV 600 V, CAT III 1000 V, CAT II 1000 V, only with protective cap
- One-year warranty
Price Range: MRP+10% Tax
Fluke TL175 Twist Guard Test Leads
Product Brochure
Brand | Fluke |
Model Name/Number | TL175 |
Probe Tip Length | 19mm to 4mm |
Operation Temperature | -20 DegC to 55 DegC |
Altitude | 2000 m |
Safety Ratings | CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max |
- Patented TwistGuard™ reduces tip exposure
- New WearGuard™ silicone leads indicate when to replace leads
- Extra heavy-duty strain relief tested 30,000+ bends without failure
- Product overview: Fluke TL175 TwistGuard™ Test Leads
Twist. Test. Stay Safe.
The Fluke TL175 TwistGuard™ Test Leads offer adjustable length test tips for use in different measurement environments. By simply twisting the test lead the user can change the exposed probe tip length from 19 mm to 4 mm (0.75 in to 0.16 in).
“They work well, are very durable, and add a whole new level to safety…along with the ability to twist them to expose the entire probe for more traditional feel while testing”- S.C., verified customer
Patented TwistGuard™ extendable tipThe adjustable tip shroud meets new electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. The correct category rating for the tip exposure being used is always visible on the test leads. This makes the TL175 test leads suitable for use in many environments:
- CAT II 1000 V
- CAT III 1000 V
- CAT IV 600 V
WearGuard™ lead wire wear indicator makes it easier to see insulation wear and tear. If the inner, white insulation layer shows through the outer, black layer, damage is indicated, and the leads must be replaced. The silicone insulation withstands high temperatures and remains flexible in cold temperatures. While the universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plughs
-
Price Range: MRP+10% Tax
Amprobe BT-250 Circuit Breaker Tester
Product Brochure
Model Name/Number | BT-250 |
Usage/Application | Circuit Breaker Tester |
Brand | Amprobe |
Voltage | 90 V - 250 V |
Frequency | 40 Hz - 70 Hz |
- Identifies circuit breaker location
- Works on all electrical systems from 90 to 250V AC
- Perfect for office, residential and HVAC applications
- Automatic sensitivity adjustment
- Quick and easy to use
- Extremely accurate reading always finds the right breaker
- Durable and dependable
Price Range: MRP+10% Tax
Fluke Modular Crimper 11212530
Minimum Order Quantity: 1 Piece
Product Brochure
Part Number | 11212530 |
Usage/Application | For LAN Cable Crimping |
Crimping Capacity | 500 |
Warranty | 12 months |
Overall Length | 9 Inch |
- Crimps 8-position RJ45 connectors and 4- and 6- position RJ11 and RJ12 connectors
- Embedded flat cable cutter and stripper
- Steel construction with ratchet mechanism
Additional Information:
- Delivery Time: 1-2 days
Fluke T+ PRO Continuity Tester
Product Brochure
Brand | Fluke |
Model Name/Number | T+Pro |
Operating Temperature | 10 DegC to 55 DegC |
Battery | 8 hours with laser and backlight on |
Weight | 255 g |
Size | 1.3 x 2.15 x 7.6 in |
Operating Altitude | 2,000 m |
Battery Type/life | AAA (2); 40 hours |
AC Bandwidth | 45 Hz to 66 Hz |
Maximum Working Voltage | 1000 V AC/DC |
Temperature Range | -30 DegC to 650 DegC |
Response Time | Less than 300 ms (95% of reading) |
Standard Input Test Current | Less than 5 mA |
- Detect live voltage, see voltage level, even with dead batteries
- 3 forms of AC/DC voltage indication: light, sound, and vibration
- Backlit LCD display and hold function for easier viewing
AC Bandwidth | 45 Hz to 66 Hz | |
Maximum Working Voltage | 1000 V AC/DC | |
Maximum Measurable Voltage | 600 V AC/DC |
Fluke TPAK Meter Hanging Kit
Product Brochure
Model Name/Number | Fluke TPAK |
Brand | Fluke |
Hook Size | 9 inch |
Color | Black |
why use | lves any hanging and positioning problem you may face |
- Strong, rare-earth magnet hanger strap with Fluke durability
- Hang with magnet or hook strap for non-magnetic surfaces
- Solves any hanging and positioning problem you may face
- Easily work hands-free
- Powerful rare earth magnetic hanger strap with trusted Fluke durability
- Hang your meter on nails, hooks and many other objects
- Compatible with many Fluke multimeters and tools
- Tapered hook and loop strap
- Universal hanger clip
- Hook hanger for non magnetic surfaces
- Strong magnet
Price Range: MRP+10% Tax
CIQ 100 SimpliFiber Pro Power Meter & Light Source
Minimum Order Quantity: 1 piece
Product Brochure
Brand | Fluke |
Warranty | 1 year |
Supply Voltage | 220 V |
Usage/Application | Outdoor Light |
Part Number | CIQ 100 |